Saturday, March 29, 2008

Home Made Survival Flashlight: For Camping (updated 1 time)

The above is an invention of mine that can work in any weather condition and cannot break. You charge it up in daylight, when it's in the "off" position. And at night it can be put behind your ear (like putting a pen behind your ear) in order to have hands free light. And you want to have a big enough capacitor to work all night long. And it will charge itself in even minimal light. But the solar panel has to be the perfect voltage, to not burn out the LED. And the LED is super bright to cut down on space needed to produce brightest light. Therefore it's a perfect small pen light.
LATER ADDED: What this circuit diagram also needs is a current regulator of some kind because capacitors loose current just as fast as they loose voltage. but batteries on the other hand loose voltage but have a constant current which is why they are preferred when not in extreme weather conditions. So what needs to be added into the circuit is a voltage regulation circuit or a Zener diode.

New House Design Pics.(updated 3 times)


The above is a revised design extrapolated from, the previously mentioned extremely simplified version of a solar still. The previous design was a good proof of concept. And this new design may not be the final design, but it's more automated now, with more output. The thick plastic wrap may be replaced by a transparent/flexible/hard sheet of plastic, that is pressure sealed and has a natural dip in the center. Otherwise have a weight put into the center that doubles as pressure for an air tight seal around the edges. And maybe a needle poked into the center of the plastic sheet to aid the water droplets.
The above is a homemade wood-burning stove that can be made extremely cheaply. And it should work theoretically. But this is extrapolated from Italian wood burning pizza ovens and wood burning stoves and rocket stoves combined. And you can put it in a house if it's a colder climate for indoor heating and cooking. Or you can put it outside if you don't want it warming your house in a warmer climate, after adding plaster over the adobe to waterproof it. LATER ADDED: The above stove is probably bad advice and may not work and is untested so instead just get a potbelly wood-burning stove to use in a house unless even that is too expensive, or unobtainable for some reason.
The above shows the slight difference between a smoker and a char paper maker. You may not want the char paper maker directly in the fire, as the goal is to char the paper, not burn it up totally. These are very useful things to have if you're living self reliantly.
There is another school of thoughts on making a smoker, which is to just put wet wood chips directly on top of hot coals. You can soak these wood chips in any liquid, even beer to add flavor to what you're smoking. You also want grease catcher or pan under any cooking meat so that the grease doesn't catch on fire and char your meat from flames, while you're smoking. This could be just a layer of tin foil between the meat and the coals.
Supposedly you don't need a refrigerator if you smoke meat. Look to Smoked meat on Wiki. And the meat could have come from hunting on your property, or with a license for only the cost of the license. And the rest of your diet could be fruit and vegetables that are free to grow, or pick from a forest.
The above is a picture of an easy to make and test, solar still, for purifying any kind of water indefinitely to make it potable. Without the need for boiling, or chlorinating, or filtering. And this system should be very inexpensive, and easy to find parts for. And it should never be able to break. You may put a friction sealed hose through the bottom of both containers in order to make a more automated approach to distilled water collection. Or use a safe glue to permanently attach the small cup to the pan, and then just drill a hole into the bottom of both newly glued together containers. And use better plastic for the plastic wrap portion.
Imagine a world where all of the drinking water that you need is absolutely free. And if you put a water jug underneath the distiller then you just store that newly filled jug somewhere afterwards. And you can make as much distilled water as you want if you just scale up the operation.
The above is the indoor heating stove which is only metal piping that goes through the roof and has a rain cover. With bigger piping you can have a bigger fire, based on the size of the room to be heated. This uses wood as the fuel, as long as you have a plentiful source of kindling. Which is also solid state, or will never break. And easy to construct by yourself, if you find the right type of ducting, and put aluminum tape or something around the connections. Also it's more efficient than a fire place because it conducts the heat into the house as it flows through the pipe instead of a brick chimney. But I now realize that there actually needs to be preventative measures factored into the above picture to keep the fire from migrating up the wood and letting smoke get into the horizontal part of the pipe and from there wafting into the house. So the horizontal part of pipe may be shorter(I'd say only about 1 inch of horizontal pipe, to be exact)leaving just enough room for a grill , and the actual fire. And there may be a cover or screen on the hole to prevent sparks from entering the house. And a heat shield for where the metal pipes touch the house. And also oxidization of the piping may or may not make the metal structure fail in the future. So some testing definitely needs to be done.
Imagine if you had no heating bill. If all of the wood for the rocket stove fireplace was gotten from your property or fallen trees in a nearby forest. Another alternative to this technology would be an electric heater if your house had solar power, and wasn't too far north.
The above picture is how rocket stoves should be made. I don't know why they call them a rocket stove, I call them a homemade BBQ. They are efficient because of low internal heat loss, and you can cook food outside on them, with just some wood. It can be made out of either, metal cans cut to shape, or just out of adobe or clay. Which when made out of adobe can be free to make if you get a thrown away metal grill found on the side of the road. And as I think about it, it may be possible to melt metal, or make burnt limestone(Cement) if you scale up the oven size and blow air into the intake part, with a fan of some kind.
Imagine a world where it is absolutely free to cook food. There is no energy bill from using a stove. And if you have wood scraps on your property, then there is no fuel costs for the BBQ. So now there's no coal or gas cost. And the BBQ is maintenance free and can be rebuilt also, practically for free. And to boil water when you can't distill it, to drink, would be free.
To make a water sealed version of the adobe rocket stove just put it in a fire and bellows in the same way as they make bricks, read following:

Mud bricks

The soft mud method is the most common, as it is the most economical. It starts with the raw clay, preferably in a mix with 25-30% sand to reduce shrinkage. The clay is first ground and mixed with water to the desired consistency. The clay is then pressed into steel moulds with a hydraulic press. The shaped clay is then fired ("burned") at 900-1000 °C to achieve strength.

This taken from Wiki under bricks

Thursday, March 27, 2008

Peanutbutter Fudge Taffy

I want to make this new type of food because I was craving it. And if it turns out to be a real food then I could market it to kids, being a novelty, and also tasting delicious. And for the recipe I will combine my dad's peanut butter fudge recipe with a taffy recipe that I found here. I also found out that the science of food chemistry is called "molecular gastronomy". This would be called a scalable type of business because you can grow from extremely small in scale to extremely large in scale as the profits increase, in your company. And all the hard work is done by employees and as the boss I wouldn't have to work at all and also I would determine my own pricing of the product, and also be the person who decides how much the employees get paid.

Wednesday, March 26, 2008

April fools day prank ideas

  1. Get your hands on some isonitriles (AKA : or­gan­ic iso­cyanides) Are the worst odors that you can come across. And if you can't find the real thing then just get a pitri dish of jello and use a wet cotton swab between your toes and then swab that onto the jello pitri dish, and you'll have a safe but nasty odor that you can putin someones car or on a seat that the'll sit in or on thier jacket.
  2. Put a really scary mask and jacket on a broom stick and prop it up against your friends bedroom door. Which will then fall onto them as they open the door. That's a wake up call!
  3. Put salt in someone's drink when they're not looking.
  4. Slather some kind of cooking or motor oil all over metal door handles.

Monday, March 24, 2008

New house design : 3/24/08 (UPDATED 9 TIMES)


Ignore all of the previous posts about "house designs", for now. Because I'm starting to rethink my design. And I found this professional adobe video
  • Cold climate version:
  • Materials: The only bad building material up north is adobe by itself. But log homes and spray foam or spray foam along with adobe together, should all work up north. As long as you include reinforcement to the spray foam so that a heavy snow fall doesn't collapse the roof. The material of spray foam is better than camp tents because of insulation qualities and also is 100% water proof and can be reinforced with a geodesic dome to make the sturdiest structure possible. Also it's easy to work with, and can be added onto late and easily cut for new doorways or new wiring, and it lasts forever.
  • Heating: And to best heat a house up north is with a "rocket stove" inside the house with a duct going out the roof(Look at this picture of one). Because there isn't reliable solar power for electric heating. And I would add spray foam insulation in the interior for extreme cold.
  • Shower: Use a rag and warm soapy water. Imagine not having any water bill from taking showers. And use dollar store shampoo and dollar store soap(Which are the exact same chemical formula as the name brands).
  • Safety:If you make a spray foam house, have a smaller opening for a door, and a steep berm of dirt put over the dome of the house, to keep bears out. And always have an AR-15 or comparable gun. Pepper spray cannot stop an angry person so it definitely cannot stop an angry bear. Also you may incorporate extra reinforcement, of wood or metal, into the spray foam.
  • Warm climate version:
  • Materials: The same as the materials used up north, except there may not be any need for reinforcement because of no heavy snowfall or animals ever being on the roof.
  • Heating and Cooling: Is all solar powered electric heating and air conditioning. I plan on making a solid state air conditioner some day.
  • Foundation: For an adobe house, the perfect foundation or just floor would be soaked adobe bricks that then dries as the foundation. If a foundation is needed. Because you may only need retaining walls for the sides of the hole in the ground even when the dome is built. And the spray foam should act as retaining walls. And the spray foam doesn't weigh enough to need a foundation.
  • Shape of structure: A perfect hemisphere shaped structure above ground and the other half of house being below ground is the best structure, because of there being even weight distribution along the dome, and the walls of the underground portion act as buttresses for the dome, as the weight is spread outward into the ground walls. Make spray foam dome form and spray from the inside of the structure to have a completely solid encapsulated spray foam structure.
  • Insulation: This is the best house structure because of the extreme heat retention/ temperature moderation qualities of the below ground part of house. Both made out of spray foam and adobe. The spray foam may even perform better than carpeting as flooring. Otherwise just have a hard adobe and plaster floor, or wood floor over that.
  • Material cost: The only costs incurred are buying the land(?$/acre), and metal rods(thrift store tent rods/50$), and spray foam(7$/can x 40= 280$/or x 1,000 cans=7,000$which is even then a very inexpensive house)and thrift store extension cords(5$/each) and garbage bags over the dome structure, as the form for the spray foam to go under, which are later removed(5$), and misc. chemicals for daily life(CLR=5$) (Bleach=5$)(Chlorine pool tablets=10$/mo) (Alcohol=3$/quarter gallon). The excavated ground is used for making adobe to put around the spray foam for extra heat retention. And you would just pile it around the outside of the hole as you dig it to make the house the high point on the property for water drainage purposes. And for less digging. from the excavated dirt becoming higher around sides to make a wall. Now just dig the size of hole you want.
  • Making adobe: First you dig a hole, then you fill it with water, then you fill the hole back in with dirt, and then mix it up. What you will end up with once the hole dries up in 1 day, is clay that has settled at the top and sand that has settled at the bottom of the hole. Now you just skim the clay off of the top, and mix it with sand in the proper portions to make adobe. This is useful for a structural and heat retentive component of a house. You can also include hay mixed in with it, acting as a binding material, for structural adobe. Adobe is also useful when making a rocket stove.
  • Safety: The low profile dome structure is a natural bomb shelter(if you have no certainty about future wars). And it cannot hurt you if it was even possible to cave in, because the only ceiling is composed of 1 ft. spray foam(which is also a structural component). And an inner layer of plaster and an outer thin layer of dirt.
  • Skills needed: It requires no skill, other than proper research and preparation(which is written here) and common sense.
  • Plumbing: This house design requires no plumbing, when you use a bucket with a seat over it, which has chlorine and CLR septic system and water in it, and the waste is dumped out in a safe place after the chlorine has evaporated. May not use the bucket inside of your house, because of chlorine off gassing, because it may give off toxic amounts chlorine gas; which by the way, may not be true because indoor pools do it all the time. So just have an outhouse where you keep the bucket of CLR and Chlorine for a toilet. To be later disposed of in a dug out, safe area. Also CLR septic system liquid which breaks up the solids, is neutralized upon contact with any water. And the chlorine always just eventually evaporates. But instead of bleach you may use chlorine pool tablets for constant chlorine saturation and not being able to waste unneeded chlorine. And just have a cover over the bucket if you need to transport it. And because all of the bacteria is now dead in the sewage, there is no bad smell being produced. And Chlorine may have to be added sometime after the CLR if the active ingredients in CLR are neutralized by the bleach.(This is easily tested by just seeing if the sewage solids are liquified fully when both the bleach and CLR are added at the same time).
    Frequently Asked Questions CLR® Septic System: (See: This link)

    WHAT IS A SEPTIC SYSTEM?
    A Septic System is a self contained Underground wastewater treatment system.The Septic System is composed of a septic tank and a leach/absorption area.

    WHAT IS A SEPTIC SYSTEM'S PURPOSE IN THE HOUSEHOLD?
    The purpose of the tank is to treat household wastes. The tank treats the waste by the water falling to the bottom, the solids that are lighter float to the top and the heavier waste/sludge goes to the bottom.The sludge/solids that fall to the bottom must be treated with a Septic System treatment to convert these materials into liquids which then will flow to the drain field.

  • 2nd way of plumbing: Is to use an Ozone generator, that pumps waste water from a container, through an Ozone bubbling chamber, and then back into the waste water container. With an added filter to prevent the pump from getting clogged, and manual agitation of the sewage and extra water mixture to liquefy it for the pump. (This has since been revised, as there is no way to know for certain if the water is actually disinfected, because there is no detector for the saturation of ozone in the water, and the bigger the vat of water to be disinfected the more uncertain it becomes as to the % of water that has been disinfected by the ozone) A better way to disinfect water that Ozone, would be a section of pipe with UV bulb that shines through the pipe disinfecting any water that passes by that section of pipe. But the bulb does have a life expectancy, and will need to be replaced eventually, maybe someday a solid state UV bulb will be invented that won't break. And can be solar powered. We have infinite clean water that comes from the sky, and for the desert we have atmospheric condensers, or underground water. So there never was and never will be any shortage of water. Just a shortage of utilizing what we have.
  • 3rd way of plumbing: Just have a garbage bag in a bucket for a toilet and take it out when full, and then put it into an incinerator oven that disintegrates the waste. But make sure that it's far away from the house or neighbors, to not smell the smoke.
  • Dome shaped form: You may put arch shaped metal rods(camping tent poles attached together) along the inside of the hole, and a screen of some kind over that (Plastic garbage bags will work). And then put the spray foam insulation layer as a moisture barrier, and as a structural substrate, for putting dirt on top of. Which would then not even need water proofing on top of. Research : polyurethane foam properties(follow link) But if it turns out that the spray foam isn't 100% water proof like it should be, then just put a second waterproof paint coating over that.
  • Need to test: So I need to test the strength of polyurethane spray foam with reinforcement incorporated into it. Also the moisture barrier qualities of the foam. And how big of a dome that has 12 inches thick of adobe, that the metal rods and foam would support. And how fire proof it actually is. LATER ADDED: I tested the structural integrity of spray foam and it has the same weight and strength of material as "styrofoam" or a really hard "nerf ball". It does rip and compresses when you stand on it. So don't stand on your house once it's built. LATER ADDED: I tested it's water proof qualities and it passed with flying colors. I made a bowl out of spray foam, and filled it with water, and the water just sat on top for hours and hours, and the bottom was completely dry afterward also. LATER ADDED: I also tested how fire retardant spray foam is by using a lighter on it. And it failed that test. So since spray foam is not fire proof, your best bet to fireproofing it is to put a thin layer of adobe or plaster on the inside of the house. And a thin layer of dirt on top of the outside dome of the house. This way the heat doesn't get through to the spray foam. And may need an emergency exit like a window if the door is blocked. And in case of a brush fire I would cut down all of the tall foliage that may be surrounding the house.
  • Reinforcement: Is not needed if the dirt layer on top of the spray foam is thin enough. But if used, the reinforcement could be bent metal rods in the shape of the house. Made out of any metal that doesn't corrode(my choice is flexible tent poles). Or electrical conduit as structure. And encapsulate them in spray foam. Which also fills in the gaps between the metal rods. If you make the dome of the house into a metal geodesic dome then you have the strongest structure possible. See: This video on making geodesic domes. Another option is just have translucent (not transparent) tarps over the geodesic dome, shingled over the dome with "grip clips", that retain heat when the sun is out. Just like a green house, which would only be used in a temperate climate.
  • Fire/Lightning/Flood/Tornado/Wind: The spray foam is not fire proof, so cover the inside of it with adobe, that is the consistancy of mayonaise, and then put paint over that. Then cover the outside with a layer of dirt. Lightning should be conducted away with a lightning rod. Flood? Don't live in a flood prone area. Tornadoes cannot even dent this house. Also don't live too close to a group of trees which may fall on the house during a storm. Or that can catch fire during a brush fire. And have an emergency exit also.
  • Doorway/windows: Make sure to leave holes for a door and small south facing(in cold climate) windows. For air flow and accessability. Or have sections cut out of spray foam that take out or put back in as portholes, that can open or close depending on the weather, that also have a screen over to keep the bugs out.
  • Airflow: You may need air flow that does not let light in, when the portholes are closed. Even though people do completely seal their houses anyway all over the place if the weather is too cold or too hot. You don't want the house to be so perfectly air tight and water tight and insulated, that it's like in the movies where you only have 2 hours worth of oxygen left inside the house every time that you close the door.
  • Entryway: This has recently been revised to have a 1 hinge "basement door" attached at an angle over a ramp into going down into the house, instead of an arched entryway.
  • Waterproofing: Make sure that the front of the entryway is above ground level in a way that will not let water down the ramp, into the house. And the spray foam provides water proofing.
  • Lighting: Have LED replacement bulbs for florescent light fixtures. Or when it's available within the next 5 years get a sheet of flat white OLED's that you put on your ceiling. Ones that require only a battery and a solar panel and just the Led's without an added high voltage inverter, would be best.
  • Electric: Have extension cords built into the walls coming from solar panels and new non- lead acid batteries or sealed lead acid batteries that are low maintenance, and an inverter just in case needed. And all of your devices then just need their own transformer to get the right amount of energy. But have a separate low power usage device system that is not reliant on an inverter. Because with the right technology high power may never be needed. The only power consumption is from a laptop computer, house lighting, and maybe a TV/DVD player depending on the need for one. Anything else is just extra depending on your personal tastes for the lifestyle you want. But remember, more complication means more things to hassle with when they break. Use this simple equation to figure out how much power you need. Watts= Amps(x) Volts (fill in the data to get the size of solar panels needed to power the sum of all devices, day and night. And the size of battery bank needed.). In a real utopia you would have super capacitors that stored the solar or wind energy that powered the home.
  • Water: Have an artificial pond dug out nearby. That will gradually fill itself with water. Or all at once after a storm. Then filter and chlorinate some of it, when some is needed for use. For drinking water use "Chlor. floc.". Or boil it. Or distill the water with the simple distiller Shown here. Imagine never paying a water bill.
  • Shower: Use alcohol soaked rags(Which is the same thing as "wet wipes"). Or warm soapy water, and rag. You make the same movements and exert the same energy by using a rag, as by taking a shower.
  • Clothes Washing: Have non water absorbent materials such as 100% nylon or acrylic. And clean them on a frame with an alcohol soaked rag. Alcohol works as a solvent and is antibacterial, and with lemon extract added, it will smell good. Or for conventionally washed cotton, have a bucket of soapy water that you agitate with a clean plunger. But if you wash conventionally you have to pay for cleaning fluid.
  • Alcohol: Make your own by fermenting any fruit. And then distilling it in one hot container, for the original alcohol to be in, and one cold container for the condensation, which are both connected and sealed by tubing. Or use the distiller shown here. Imagine never paying for cleaning chemicals. And you just leave it for a year and it makes itself.
  • Furniture: Have inflatable bed and maybe even furniture, to keep down dust mites, and to produce less dust to clean. And make your own wood furniture, because it's simple enough. Carpet is the weirdest invention that humans have ever come up with. they need replacement frequently, cause dust, offgas fumes from the glues in them, and need a vacuum cleaner for the soul purpose of carpets. Just have solid floors with spray foam insulation under them and use a "swivel sweeper" to sweep them, or just a broom and dust pan.
  • Vehicle: Use the same technology that everyone else does. I did some research on making biodiesel that you can see here. But I may make my own electric charging stations in the future, by buying small pieces of land all around the state and putting a solar panels on them to stop at with my electrical vehicle of choice. All with the money I save by not paying a mortgage each month. Electric will easily outsell internal combustion cars when the gas prices are 6$/gallon. So our society will never have to revert to living without vehicles.
  • Heating: Use an electric heater, because solar power is reliable in temperate climates.
  • Air conditioning: Some kind of solid state cooling that doesn't break and is energy efficient. There are "wick fans" that cool a water soaked wick by evaporation and are energy efficient, and don't break. But that produces humid air. A sterling engine is nice to have. Being in the below ground portion of house is cooler, if you don't let sunlight in. Just conventional air conditioners work fine but I thought of a solid state version that will work in the future see it here.
  • Refrigerator: May not be needed if you smoke your hunted meat(See: This diagram of a smoker), and otherwise eat fruit and vegetables. See Smoked meat on Wiki. But if it's needed then just use the conventional fridge, or a new solid state energy efficient version, if there is one. As in sterling engine. But for infinite energy to power the fridge you should definitely invest in a solar panel and batteries to power it forever, without paying a monthly energy bill forever.
  • Cooking: Is done on a "Rocket stove"(See: This picture of one), and if you need an oven then use a large box with a chimney as a wood burning oven, or just a dutch oven. Otherwise use a grill or a pan or a hand held flipping grill or a pot. Which all can be sanitized over the fire after rinsing and scraping the dirt off of.
  • Dishes/Utensils: Wash by hand in warm soapy water.
  • Fruit/Vegetables/Spices: Grow year round crops in cold and hot weather outside and in a greenhouse with growlights. Or freeze crop overruns if you live up north.
  • Meat/Eggs: Catch it, or hunt it, or farm it. Then smoke it. Having chickens can be like having any other pet, if you only ate their eggs. Buy traps, or make one out if some cord. Go spear fishing with a homemade bow and arrow(See how to make them here)
  • Sweets/Dairy/Baked Goods/Nuts/Oil/Specialty: Buy from store if needed.
  • Entertainment: Is needed because going on nature walks can only entertain you for so long before you want to watch TV, but then again that's way more fun to some people. So may buy TV shows on DVD or watch TV shows on youtube, If you can find a way to get satellite internet on your property.

Tuesday, March 18, 2008

How All Of The Zeta Reticuli, Project Serpo Technology Works

All of this information is only speculation and is not fact. It is only an attempt on my part, based on my own understanding of science and some creative thinking, to explain how the project Serpo devices would function, using our known laws of physics. None of these ideas are even testable. But I only wrote these ideas on the Project Serpo technology as a starting point to further scientific advancement. Not as the final word on the subject. Hopefully these ideas are inspiring to other creative thinkers. And what is now only purely hypothetical, may eventually be turned into a testable theory.
Follow the links:

Monday, March 17, 2008

Infinite Videogames: How To Get Emulators And Roms

For being able to play Super Nintendo on your computer.

First you wan to pick the emulator with the most stars(best reviews) from this link

Then you want to see the system requirements you need on your computer to run the emulator on your computer.(which may say you need direct x 9.0 or something higher)

Then before downloading the emulator you want do download 'directx' from 'microsoft downloads' on their site which will require lots of memory and I have 1mb of ram and 120mb HD and the direct x works fine on my computer.


Then down load the emulator and put it in it's own 'supernintendo' folder. This doesn't require much memory storage.

Then download all the super nintendo games you want from http://vimm.net/
But remember that you just unzip it when you have already downloaded the game. And that option is located on the part of the window where you see "organize, view, and burn" and that's right below where you see"file, edit, view" on the window.

Then download the Rom of the game of rampart for the super nes. If you wanted to download it and play it

Then you just get any computer USB controller. And they all work automatically when plugged in.(So there's no software or driver needed).You just program in the keys that you want to have for each button of the controller.(Button programming is located in the emulator program when opened under input. Get the controllers at a thrift store(used) or a video game store or a computer store. Don't pay more than 10$.

Money Scheme

I just had a thought. If you had a 6% interest earning account of say 30,000$, which is about 300 $/mo of extra income payable to another account/mo. And you combined that fact with the effect of dollar cost averaging.
Rather than buying a set # of stocks every month you instead buy a set $ cost every month.

Then supposedly you would buy 300$/mo of mutual funds or gold or both. And over time the compound interest effect and the dollar cost averaging effect combined would give you a combined higher interest rate than you could normally get.
Also this would be set up to automatically happen whether you watch it or not.(The 300$ goes into an IRA of stocks or gold every month so that you can't take out the money unless you really try)
This would be the best compound interest for the novice investor.

Automatic Success,Theory

As found in the book "The Automatic Millionaire" and also in diet plans.
The best way to be successful at becoming rich or dieting or exercising or learning a new skill. Is to set up your life so that it automatically happens. Otherwise you have to battle your human compulsions. And you will convince yourself to not do things that are in your own best interests. all based on your feelings and not logic.
I used to drink soda pop all day long because I was addicted to the sugar in it. But then I started not including it in my shopping cart when I went to the store, because I was logical while shopping. And gradually the urge to drink soda disappeared. And now I only drink soda when it's offered to me. To automatically be on a diet, just don't include bad food on the shopping list and you will be forced to eat what's in the house, or eat out.
And the automatic millionaire works in the same way. If you have money in your pocket everyone tends to spend it just for immediate satisfaction and not long term satisfaction. So I think that I may need to set up an automatic, out of account, amount of money every month that goes towards an investment like gold or mutual funds. Because of dollar cost averaging being a good way to gain more over time. Rather than buying a set # of stocks every month you instead buy a set $ cost every month. And if it was in an IRA then I wouldn't be able to access the money without a lot of effort. Therefor I would have an automatic way to become rich.
And an automatic way to force yourself to exercise, would be to ride a bike one way until tired and then you would have to ride all the way back anyway no matter how tired you were. Or you could do something that you find fun like metal detecting which requires lots of exercise. Or you could get a job that you rely on that you get lots of exercise at while working.
And to automatically learn new things, a good trick is to buy books on tape that you have to listen to as you drive everywhere that you go. Or have a subscription to an online business word building site, that will send you 1 new word/day, in your email. As long as you check your emails every day anyways.

Spontaneous Emission

"Spontaneous Emission" Is a term that I came up with to describe the effects of high energy fields.
As the static electric field becomes stronger it will spontaneously create new subatomic particles as the field grows stronger.
This creation of new particles isn't free because it will drain the power source for each new particle that is created. By absorbing ambient temperature and charge when forming.
The effect is usually seen in lightning and the glowing insides of extraterrestrial craft. But less well known in the effects which I theorize are also linked. Which are the "photoelectric effect" and "radioactive decay".
Because when you have an abnormally large positive charge in such materials as enriched uranium. you will get spontaneous emission of dangerous radiation. And if you were to spread apart the uranium into separate protons, the radiation would then cease from spreading the positive charge over a larger area. Because of less charge/area= less spontaneous emission.
And in the way that "Light Emitting Diodes" function. You get a negative charge, of a magnitude that is enough to emit light, but not enough to emit dangerous radiation. This process of the photo electric effect is found to be 100% efficient because of the law of "the conservation of energy".
When you have a high electric field you spontaneously form photons. But when these photons form they must absorb ambient charge from their surroundings to form. And therefor this is direct 100% efficient transformation of energy from electricity to light.
It is also worth noting that I believe that the warping of space by gravity is theoretically one and the same as the warping of space by a high static electric field. Read my last 2 posts for more on this.

Sunday, March 16, 2008

Making Antimatter : Theoretically

I finally put 2 and 2 together, and I think I know how to make antimatter. Theoretically.
So in my last post, I discussed how when space is cold enough it becomes denser space, and in so doing the density of energy(in other words subatomic particles) becomes as great as the energy density of hydrogen which is [E=MC(sq.)].
With that mathematical equation in mind, I think that my term:"density(coldness) of space" is the same as saying "strength of gravity".
So now following that logic, you can create your own matter, if you have a high enough gravitational field. Which is either artificial or natural.
How do you make an artificial gravity field? Well I assume that gravity and static electricity are one and the same. I assume this due to the fact that they are both a radiating, warping of space. And if it looks like gravity, and acts like gravity, then it probably is gravity.
But beyond that and it's implications for space travel. I assume that if you can spontaneously create matter out of nothing with a high enough gravitational field. Then it also follows that you can create antimatter with a high enough antigravitational field. Which is a high negatively charged static electric field.
And if you think about it, matter has a positive electric charge, and antimatter has a negative electric charge. So it makes sense, that a high enough field would create that type of particle, if making particles is possible in that way, using the math of E=MC(sq.) as a guide.
And just as with fusion and fission, I theorize that creating a particle of matter would absorb ambient temperature and static charge when it is created. Lowering the overall (+)charge of your atom creating machine. And I theorize that when an antimatter particle is created as well, it would absorb the negative static fields energy during its creation. So that it would lower the ambient (-) charge of the anti-atom making machine and increase the temperature of the surrounding area.
Now all you need is to encapsulate that antimatter in neutrons and you will have the beginnings of the project serpo infinite energy device. Which would make the creation of more antimatter easier, from the energy field being easier to obtain, by the newly available free energy.
Once you can mass produce antimatter in this way you now have made infinite energy space travel fiesable. And can distort the laws of physics to make time pass slower for the inside of the space craft. And you can have a superfluid outer hull of the ship to never even be touched by an asteroid(not totally sure of that yet). And can also produce artificial gravity plates to walk on.

Saturday, March 15, 2008

Black Holes, And "In The Beginning"

Let us begin with some well accepted facts.
  1. Information is lost inside a black hole(Called the Hawking Paradox). which means that the matter that was consumed by the black hole, is lost into nothingness, when the black hole dies, and disappears itself also.
  2. We have a "theory" of the big bang but that, nor any other theory describes why the big bang happened, how it happened, or what happened before it in the first place. (In other words, what created the matter in the first place).
  3. There are dwarf galaxies in the empty space between galaxies. Composed of mainly hydrogen.
  4. These facts alone mean that anyone with any theory at all about the universe, could be the actual correct one, and know the real facts of the way the universe functions. Because no scientist can even tell you you're wrong when they have hardly any facts about space at all yet themselves. Scientists currently use alternate dimensions and imaginary particles(Tachyons, Axions) to make the math add up.
  5. Supposedly we can see the big bang in all directions, by primitive protogalaxies being visible in all directions. Which is conveniently explained by the universe being 4-dimensional and it's therefore just an optical illusion.
So the conservation of energy says that energy can only be transformed, and cannot be created or destroyed. That in itself says that black holes can't destroy the information of matter when they disappear.
I propose that the matter in a black hole is transformed into energy in the same way as atomic bombs transform matter into energy. The evidence of this being, x-ray and UV emissions found coming out of the center of black holes. But beyond the insignificant size of photons there are even smaller particles which make up the space itself between stars. The evidence of fields of particles too small to see in any way, are electromagnetic fields, which are only lines of flux. But that tells you that there is a medium or a substance, that the flux is made up of.
It then follows that matter which is destroyed in black holes has to then be sprayed out into the interstellar medium as energy (x-rays, UV particles) and fractional particles smaller than energy(in other words the particles that space itself is made of). See: Einsteins general relativity.
And what happens when you fill the area between the galaxies with more space, in the same way as you would fill a balloon with air? You get an effect that can be mistaken as an "expanding universe". When it is in reality extra space being pumped between galaxies by black holes.
You may now ask me, that if the matter is turned into energy, then wouldn't all of the matter be eaten up over time and become a universe composed entirely of energy eventually? Well that's where my theory of how the universe began comes in.
------------------------------------------------------
When the universe began there was nothing except the smallest of smallest particles making up the limitless void of "only" space. But then those sub atomic particles began to clump together. From extreme cold making them extremely dense, movement was born into the universe because voids between particles were created as they condensed together. But when the medium of space is dense enough from the extreme cold, I believe that mathematically an atom of hydrogen must be created. Due to the extreme energy(space) density of absolute zero being the same energy density as is needed to create a particle of hydrogen(Otherwise described as the density of space itself becoming the same energy density as the equation e=mc2).
The above theory has noteworthy evidence behind it in that the large and small Magellanic Clouds which are located in the space between us and other galaxies, are composed primarily of hydrogen and helium, and no metals whatsoever. Which I predict were formed from the extreme cold between galaxies. Cold being a form of energy that at the highest energy density may create matter. Although I still concede that other forces may be at play as well in the interstellar medium that create energy density in the order of magnitude capable of forming basic particles.
Fact that I somewhat recall: Something like 70% of known space is permeated by free floating hydrogen.
Then after you are making free hydrogen from the super cold temperatures of inter stellar space you get charges that attract hydrogen atoms together. And then those charges become gravity, on the macro scale. Where even the like charges in objects(+/+) attract each other, only because of the size differential of the charges. Because if you have a large enough (+) charge it will attract any small (+) charge.
Then you have a sun which when it becomes super massive, will create new types of elements through fusion. And when the stars collect into a galaxy, the center becomes a super massive black hole. Which will then destroy all of the matter that was once created.
And the process begins all over again within the vast cold expanses between galaxies where protogalaxies(dwarf galaxies) are formed and expand. In a never ending cycle of the infinite universe.
=============
SIDE NOTE: It occurs to me that the cosmic background radiation could be caused by the gravity of our solar system, or previously stated as cold dense space, but in our solar system the solar wind protects us from any outside even more dangerous background radiation, the gravity of black holes creating x-ray and gamma ray spontaneous emission and the gravity inside of a planet creating infra red light spontaneously and stars creating visible and UV light. And as was mentioned, extreme cold and extreme electric charge(in other words gravity fields are the same) cause particles to coalesce from smallest particles to biggest particles, as the space gets colder and denser, and atoms and energy form out of space itself (I call it "spontaneous emission"). The order in which energy and particles are made from the warmest space(least dense space)- to coldest(most dense space), is as follows:
  1. radio waves in somewhat least dense space
  2. light waves in more dense space (space isn't dense enough in most of space until it's as dense as around Jupiter will it begin to emit infra red light).
  3. gamma rays in even more dense space(suns)
  4. and at the most dense space/or highest static electric charge/ or at the coldest temperatures- actual (+) charged atoms will be created
In reality it's probably a combination of cold /and charge/ that combine to form natural atoms in nature. So the right conditions would be needed, sort of in the same way as when freeze drying the pressure needs to be low before freeze drying will be possible.
Also when you have a large static electric field all of the above effects will occur in that static field in the same order. Which is what you see with UFO's technology normally, is the high charges will emit light and at even higher charges will emit deadly radiation.
So I theorize that when people describe the insides of UFO's, and there is ambient light that comes from all directions, it's just electric charge emitting photons. And also why lightning bolts emit light.
It's all because of the static electric charge(which has the same physical characteristics as gravity). And cold that cause all of the forces that make atoms and energy out of nothingness. Hypothetically.

Thursday, March 13, 2008

Perfect/ Indefinite Battery Charging

This gotten from here(Wiki):
"The charging voltage is in the range of 1.4-1.6 V/cell. A fully charged cell measures 1.35-1.4 V (unloaded), and supplies a nominal average 1.2 V/cell during discharge, down to about 1.0-1.1 V/cell (further discharge may cause permanent damage). In general, a constant-voltage charging method cannot be used for automatic charging. When fast-charging, it is advisable to charge the NiMH batteries with a smart battery charger to avoid overcharging, which can damage batteries and cause dangerous conditions. A Ni-Cad charger should not be used as an automatic substitute for a NiMH charger."
A good safety feature of a custom built charger is to use a resettable fuse in series with the battery, particularly of the bimetallic strip type. This fuse will open if either the current or the temperature goes too high.


I bought a "(3.6V) PowerFilm™ flexible solar module" from the Edmundscientific site. It is possibly the best way to charge a battery because it's automatically the right voltage in the solar panel to the battery. And so all you have to do is attach 2 batteries in series with wire. And you've got yourself a charger that can't break and can work on camping trips, and in any weather to recharge batteries during the day to use in LED headlamps. And just buy extra batteries or chargers if you use a lot of batteries while camping.
Or you could just use the solar panel charger at your home in a window.
But you have to watch the voltage of your charge with a voltmeter to not over charge the batteries.(see the above optimum voltage).
This is some product info: This is the instructions link

"These PowerFilm™ flexible solar modules can be used alone to direct-power your small DC project (anything that runs off 3.6V or less and requires 100mA of current or less) - or, they can be used in your battery-charger project to store energy for later use.


BATTERY-CHARGING TIPS

For battery charging, the voltage of your solar panel MUST be higher than the voltage of the battery that you want to charge. We recommend using the following guidelines:

· at least 2.0 volts to charge one 1.2 volt battery

· at least 3.6 volts to charge two 1.2 volt batteries wired in series

· at least 4.8 volts to charge three 1.2 volt batteries wired in series

· at least 6.0 volts to charge four 1.2 volt batteries wired in series.

Multiple panels can be wired together to increase voltage or current, and the panels can be cut (following directions!) for your special project.

Each module is encapsulated in 3 mil clear polyester film.

Specs:

· Output 100mA @ 3.6V

· Open-circuit voltage: 4.8V

· Total size: 2.9" X 5.9"

· Total solar cell size: 2.4" X 5.9"

· Total thickness: 0.22mm (8 mil)

· Weight: a few grams"

"Operating voltage 3.6VDC Operating current 100 mA Typical Voc 4.8V Typical Isc 130 mA Total size 74mm x 150mm (2.9 x 5.9 inches) Aperture size 60mm x 150mm (2.4 x 5.9 inches) Thickness 0.2mm (8mil) Weight 3.1g (0.1oz)"
And from the panasonic NiMH spec sheet it says that the maximum voltage that 1.2 V nominal voltage batteries can handle is 1.8 V which is 5.4 volts in a series of 3 batteries(always charge in series). Which the solar panel will never be able to exceed. in other words when the battery is fully charged the solar panel will give out less current, until it is only a small trickle charge. And put simply that means that you can leave it unattennded and it will take care of itself without breaking ruining the battery. As long as you have a diode to keep the battery from discharging when the solar panel is in the dark.

OR GET:AA foldable solar charger if you want a plug and play operation, with no electrical knowledge needed. Even though it costs 3 times as much, for the same parts.

Tuesday, March 11, 2008

Silver/ Gold Prediction

In the coming years the dollar will become more and more worthless and then all bets will soon be off. So you will need to invest in god made money, which is precious metals. Because the dollar is now printed currency(human made)and not gold backed anymore.
This is the very reputable source that I got this from Rich Dad Poor Dad site
Watch the predictions '08 video and see the inevitable. He's been right before so now I'd listen.
So as he says, invest in gold and then if you have at least 8000$ worth now, then you'll be able to buy a house when the dollar is worthless.
Or just live in the wilderness to not have the hassle of the end of the world. Because we may have a Hitler copycat that tries to save our currency system like how world war 2 started. And if the end of the world ever does actually come then the best place to be is on the water. Because no one wants to bomb that. But that's only if the united states becomes chaos from the currency thing. Otherwise we still have the missile shield.
I'm going to try "Etrade" and see if they sell commodities, because of a commercial I saw on TV.
About"futures exchange"

Saturday, March 8, 2008

Time capsules

I plan on making time capsules for my valuables when I go out on my on the road infinite vacation. This way I don't need to pay for a safe deposit box or anything.
It will be in a very durable/thick plastic container sealed with silicone and duct tape for redundancy. And it will have something metal in it like tin foil, so that I can detect it when I'm in the area.
I will write down the GPS coordinates when I bury it and to find it again I just need to go on a geocache search.
It needs to be located away from trees so that roots don't grow into it, and ruin it by breaking the container.
This technique is also good for saving an otherwise worthless item for the future in mint condition until it has become an antique and extremely valuable collectable to museums, and such.
Also I don't want to put all of my eggs in one basket. So I will make multiple smaller containers. Just in case someone digs one of them up, and just in case one is ruined by roots.
Never let it known where it was buried, before or after it was buried.

Thursday, March 6, 2008

How The "Project Serpo" Infinite Energy Device Works, Theoretically

This is the 1st step of the process of how the device functions.
The neutron encapsulated antimatter is inert because the antimatter is encapsulated by neutrons (that's what they said the tiny spheres in the interior substance was- don't ask me how they made it) suspended in a low viscosity fluid is 1st attracted to any positive charge. Supplied here by the diode.
Because all negative charges are attracted to all positive charges whether the negative charge be electrons or the antimatter. The (-) antimatter attracted to a positive plate.
That's why they said that electromagnets didn't work with the device, because electromagnets have no polarity. But any device with a unidirectional(polarized) flow of energy would work on the closed energy device.(Hence the use of a diode in the picture).
And also an added feature of the magic rectangle device, was that the electrode plates doubled as a universal resistor. Which I theorize is just made of bimetallic strips or segments that as more energy demand is put upon the energy device, the bimetallic strips(2 different kinds of metal cemented together) will deform and bow outward as the resistance of the high load in the small section of the electrode plate creates a heat that deforms the bimetallic sections. And as the sections bow outwards they touch more metallic sections, creating a larger conductive surface area until it reaches the specific energy demand of that particular load. And that equilibrium performs the same functions as resistors do in our devices today.
Now in the 2nd function of the device, a pressure differential is created by the movement of the antimatter and the actual shape of the enclosure being a rectangle(why it was called the magic rectangle). The new pressure difference(as shown by the milibars) forces the antimatter to move in the direction of least pressure(least resistance). The lower right corner has the least pressure, and so the antimatter at the positive plate will now flow towards the lower pressure on lower right side.
Then in the 3rd and final step of operation of the device. I liken it to performing the same function that thunder storms carry out all the time. Which is circulation of material of any kind which causes separation of charges, and the charges equal out by following the path of least resistance which is through the metal plates(+/-) connected by a wire and a polarized load. And the only thing slowing down the particles of antimatter from rotating, is the fluid that it is suspended in. Therefor you want the least viscous fluid possible, to get the best performance out of your device. Optimally the viscosity of a superfluid such as liquid helium is(look on "youtube" under "liquid helium"-weird-). Oil is the best lubricant we use in cars today but that is nowhere as good as a superfluid is.

Another note worthy science used in constructing the device is that I surmise that most aliens when constructing anything make substances travel directly through walls. So that they don't need conventional fasteners to make things. So in order to make the energy device they supposedly make a crystal box enclosure in one solid piece, and then transfer the antimatter solution directly through the walls of the crystal enclosure. But the way that this is theoretically possible is only with extremely high static fields that offset any law of physics that says that an object is solid(super fluid), or that there is equal and opposite reaction. Because all physical properties of any material are relative to their level of different forms of energy. But I'm by far not an expert on this, but in theory all you need to distort the physical properties of matter are extremely high electromagnetic fields. And it can probably be proven mathematically. But that's for another blog entry to describe.

Also I think I heard that "helium 3" was described in being part of the process of producing raw antimatter. And that helium 3 can be only found in solar wind and has been collected by the moon for eons. And that until we go to the moon and mine it and at the same time make helium 3 cold fusion reactors(which are infinite energy, in and of itself). We won't be seeing this technology for longer than we will live to see.
For further study, you may want to read the entire project serpo account, just for fun.(follow link)